View Full Version : help mods icom ic706mk2g
RX9CFS
08-25-2008, 07:09 AM
I have ic706mk2g.
it is brought from japan.
27mHz - no!!! :(
K9YLI
08-25-2008, 02:15 PM
pretty criptic question.
be more 'pacific'
EI6GYB
08-25-2008, 02:26 PM
I have ic706mk2g.
it is brought from japan.
27mHz - no!!! :(
I think he is trying to say he imported an Icom radio from Japan and it doesn't transmit on 27MHz?
WA9SVD
08-26-2008, 02:10 AM
Or is he looking for mods to allow transmit in other ITU region allocations, and saying he is NOT looking for "CB" mods.
A more specific request would help....
RX9CFS
08-26-2008, 02:18 AM
I imported an Icom radio from Japan and ic706mk2g doesn't transmit on 27MHz.
RX9CFS
08-26-2008, 02:20 AM
Electronic translator :confused: :confused: :confused: :(
kc9khg
08-26-2008, 02:23 AM
It's not suppose to TX on the CB band.It is not legal to TX on the CB band with that radio.;)
At least not here in the US.
RX9CFS
08-26-2008, 02:54 AM
It's not suppose to TX on the CB band.It is not legal to TX on the CB band with that radio.;)
At least not here in the US.
:(:( ...radio mods...
RX9CFS
08-26-2008, 10:08 AM
I have a Japanese version......
I did first remove the D2030 diode on my radio, but that did not open up the TX range. Then I removed the D2028 diode, and this opened up TX from 1,6-26 MHz and 28-30 MHz.
27 MHz - not :(
In which country is 27MHz an amateur allocation?
In which country is 27MHz an amateur allocation?
None, I believe.
None, I believe.
Hmmmm.... :eek:
RX9CFS
08-27-2008, 02:40 AM
27Mhz - not for radioamator (CB) ;)
...I'm delirious...:confused:
I want crack TRX from japan /TX 1mHz-200mHz,400-470mHz/ :cool:
dream ... :rolleyes:
RX9CFS
08-27-2008, 03:02 AM
??? :( ???
zl3gsl
08-27-2008, 05:21 AM
In NZ, there's a 27MHz amateur band (26.950 to 27.300), shared with ISM, 5W EIRP max, telemetry or telecontrol modes only. Hardly need a 706Mk2G for that.
I have ic706mk2g.
it is brought from japan.
27mHz - no!!! :(
The japanese ICOM 706MK2G is blocked on 27 MHz
Japan has 8 channel, AM citzens band allocation between 26.968 and 27.144 MHz.
Other frequencies in this range are used by fishing vessels, this the reason for tight control.
WA3RA
09-03-2008, 09:04 PM
The JDF also uses many 27MHz frequencies!
In many countries, it is perfectly legal to open up and use this radio. Japan is NOT one of them.
The JDF also uses many 27MHz frequencies!
In many countries, it is perfectly legal to open up and use this radio. Japan is NOT one of them.
I for one would like to see documentation substantiating that claim...for the "next time" this particular question gets asked.
RX9CFS
09-05-2008, 04:34 AM
want TX
148 mhz
32 mhz
410 mhz
:( :( :( :( :( :(
RX9CFS
09-05-2008, 04:36 AM
change ic706mk2g japan on ic706mk2g europe...
dream ...
AE6LX
09-05-2008, 05:11 AM
Is it the japanese version or the european version?
K9YLI
09-05-2008, 02:10 PM
finally a real set of freqs..
now just what services in russia us these freqs..
or where ever RX9 is
According to the pic below, a diode is installed in the 'EU' and version in the spot indicated. Removing said diode will make the radio behave like its USA cousin.
There is also a "None" spot - could that be the position for the "JA" diode?
http://www.kb2ljj.com/data/icom/706mkiig.jpg
RX9CFS
09-08-2008, 02:13 AM
this is japanese version
kc2cko
11-06-2008, 06:25 PM
I imported an Icom radio from Japan and ic706mk2g doesn't transmit on 27MHz.
ten meter band is from 28.00 to 29.700 mhz ic 706 will not transmitt out of amature radio bands without midification.
I would not do it.
paul kc2cko
ten meter band is from 28.00 to 29.700 mhz ic 706 will not transmitt out of amature radio bands without midification.
I would not do it.
paul kc2cko
But he's looking to do it. Notice the callsign - NOT U.S.
Can anyone help with the mod data?
G3WTA
11-06-2008, 11:12 PM
I imported an Icom radio from Japan and ic706mk2g doesn't transmit on 27MHz.
Hi, this mod is easy if you have patience.
Look at this URL http://www.geocities.com/k3xf/ic706.html
Remove D 2030
I have this on my Icom - it works fine!
73, Mike :)
Hi, this mod is easy if you have patience.
Look at this URL http://www.geocities.com/k3xf/ic706.html
Remove D 2030
I have this on my Icom - it works fine!
73, Mike :)
Nice link 10